Presonus StudioLive 24.4.2 Manuel d'utilisateur télécharger pdf (Page 35)

3 Universal Control and VSL

3.6 VSL: GEQ Tab

StudioLive

™

Software Library

Reference Manual

3.6.2 Enabling a GEQ

By default, all graphic EQs are disabled. To enable them remotely via VSL, simply click

on the Enable button to the left of the sliders.

3.6.3 Flattening a GEQ Curve

To zero out all curve settings on any GEQ, click on the Flatten GEQ button, which is

directly below the Enable button. This will ﬂatten all band gains to 0 dB so that they

neither boost nor attenuate any of the 31 bands.

3.6.4 Enabling Smaart Analysis

By default, Smaart analysis is disabled. While Smaart is disabled, you have control

over which bus is routed to Auxiliary Inputs 29 and 30 (StudioLive 16.4.2 and 24.4.2).

Clicking on the Spectrograph or RTA buttons will start Smaart, and VSL will take

control over Auxiliary Inputs 29 and 30 (StudioLive 16.4.2 and 24.4.2).

StudioLive 16.0.2 Users: You must route your main mix to Flexible Inputs 15

and 16 in order to use Smaart analysis. If analog inputs 15 and 16 are patched

to the Flexible Inputs, the Spectrograph and RTA buttons will not function.

For more information on the Auxiliary Inputs and Flexible Inputs Routers, please see

Sections 3.7.1 and 3.7.2.

3.6.5 Time-Frequency Spectrograph

Clicking on the Spectrograph button will launch the Time-Frequency

Spectrograph. This Spectrograph provides a three-dimensional view of

your audio in which x = frequency, y = time, and color = decibel level.

Any signal below the lower dynamic-range threshold is black. Any signal above

the top dynamic-range threshold is white. Within the dynamic range, colors go

from blue to green to red, with blue indicating the quietest and red the loudest.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 149 150

Pas de commentaire

Presonus StudioLive 24.4.2 Manuel d'utilisateur Page 35