Presonus StudioLive 24.4.2 Manuel d'utilisateur télécharger pdf (Page 34)

3 Universal Control and VSL

3.6 VSL: GEQ Tab

StudioLive

™

Software Library

Reference Manual

3.5.5 Loading a GEQ Preset

To load a graphic EQ preset, select it from the Browser window and drag it

over any part of the focused graphic EQ. Graphic EQ presets can be loaded

on the Overview tab or the GEQ tab. Once a preset is loaded, you can use the

sliders in VSL, or the encoders on the StudioLive, to make adjustments.

Please Note: You must be in the GEQ

menu page for the graphic EQ you wish

to control in order to use the encoders on

your StudioLive to control each graphic

EQ in VSL. See the Section 5.3 in the

StudioLive Owner’s Manual for details.

3.6 VSL: GEQ Tab

The StudioLive 16.4.2 and 24.4.2 feature 4 dual-mono graphic EQs. Assignable

in stereo pairs, these graphic EQs can be inserted on any of the 10/6 aux buses,

the 4 su/jointfilesconvert/1486887/bgroups, or the main bus. The StudioLive 16.0.2 features one stereo

31-band graphic EQ on the main bus. In addition to allowing you to control

each graphic EQ individually, VSL automatically links each dual-mono graphic

EQ to create a true stereo graphic EQ if the pair is inserted onto a stereo bus,

allowing you to control both sides at once. (For example, if you insert GEQ

1/2 onto Su/jointfilesconvert/1486887/bgroups 3 and 4 and stereo-link the su/jointfilesconvert/1486887/bgroups, GEQ 1/2 will

function as a stereo graphic EQ rather than a dual-mono graphic EQ.)

From the GEQ tab, you also have access to Smaart Spectra™ analysis

tools. These tools can be used to ring monitors, view the frequency

spectrum of your mix, or check the overall output level of a bus.

Note: The GEQ menu on your StudioLive does not have to be active to make

changes to a graphic EQ from VSL. If you wish to use the Fat Channel encoders

to control the graphic EQs in VSL, then you must open the GEQ menu on your

StudioLive. See Section 5.3 in the StudioLive Owner’s Manual for details.

3.6.1 Selecting a GEQ to Edit (24.4.2 and 16.4.2 only)

Along the top of the GEQ tab, you will see another set of tabs, one for each dual-

mono GEQ. To bring a GEQ in focus so that you can edit it, simply click on its tab.

Power User Tip: Unlike controlling the graphic EQs from the StudioLive

mixer, each pair of graphic EQs in VSL follows the linked state of the bus

to which it is assigned. If you link Aux 1 and 2, for example, and make a

change to the GEQ assigned to Aux 1, the GEQ assigned to Aux 2 will change

simultaneously. GEQs assigned to the Main bus are always stereo-linked.

GEQ Bus Assignment (24.4.2 only). To insert a graphic EQ on a bus, click on the

pull-down menu below the graphic EQ’s number and select the pair of buses onto

which you’d like to insert it.

Because the graphic EQs are dual-mono, they must be assigned

in stereo pairs. However, unless the bus is stereo linked,

you will have control over each GEQ individually.

Power User Tip: If a bus is stereo-linked, the graphic EQ will link

automatically. This can be overridden temporarily by holding

the ALT/OPTION Key while moving a graphic EQ slider.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 149 150

Commentaires sur ces manuels

Pas de commentaire

Presonus StudioLive 24.4.2 Manuel d'utilisateur Page 34

Commentaires sur ces manuels

Produits connexes et manuels pour Multimédia Presonus StudioLive 24.4.2