Presonus SL Room Control Manuel d'utilisateur télécharger pdf (Page 18)

4 Speaker Groups

4.5 Group Edit Page

SL Room Control

User Guide

• Thermal. This indicator monitors the temperature of the onboard ampliﬁers. It

will not illuminate while the temperature is within normal operating limits (less

than 147˚ F/63.9° C). It will illuminate yellow when the temperature rises to

dangerous level (147 – 152˚ F/63.9 – 66.7° C). It will illuminate red when the

temperature rises to a level where your loudspeaker will be severely damaged

(over 153˚ F/67.2° C). Note: If this indicator turns yellow or red, power oﬀ your

loudspeaker immediately and let it cool down. Your loudspeaker should not exceed

thermal limits during normal operation. If it does, you may need to contact PreSonus

to arrange for a repair.

• Excursion Limit. The movements of the low- and mid-frequency drivers are

monitored to make sure an over-excursion will not occur, as this can signiﬁcantly

damage your loudspeaker. If any of the drivers in the loudspeaker icon illuminate

red, the excursion limiter has been engaged to protect the speaker. This indicates

that you are driving your loudspeaker too hard and should lower the volume.

4.5 Group Edit Page

The Group Edit page allows you to raise and lower the relative level of an

entire speaker group and apply a 31-band graphic EQ to the entire group.

To open the Group Edit page, click on the “gears” in the upper right corner of the

Group Monitor page.

Naming Speaker Groups. To give your speaker group a

custom name, tap on the default name in its icon.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Pas de commentaire

Presonus SL Room Control Manuel d'utilisateur Page 18