Presonus BlueTube DP v2 Manuel d'utilisateur télécharger pdf (Page 13)

Owner’s Manual

Deutsch

Español

Français English

Hardware 3

Front-Panel Layout 3.1

3.0 Hardware

3.1 Front-Panel Layout

VU Meter. The analog VU displays the output level of

your BlueTube DP V2.

48 Volt Phantom Power. This button enables

phantom power to the XLR input. Here is the XLR

connector wiring for phantom power:

Pin 1 = GND

Pin 2 = +48V

Pin 3 = +48V

Phase Reverse. Reverses the polarity of the signal.

Use Phase Reverse to combat phase cancellation

between microphones.

-20 dB Pad. This button attenuates (lowers) the input

signal by 20 dB. The pad can be used to keep a hot

signal from overdriving the microphone preamp.

80Hz Roll-o. The 80Hz button is a low-end roll-o

lter. When depressed, this button causes all

frequencies below 80 Hz to be attenuated (dropped)

by 12 dB. This lter can be handy in live and studio

applications. For example, the 80Hz lter can help to

reduce the “boominess” or “muddiness” of a vocal and

can improve the overall clarity.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Pas de commentaire

Presonus BlueTube DP v2 Manuel d'utilisateur Page 13